If this is the first time that the computer is connected via 802.1x authentication must enable the service.

• Click the Start button in the Search box, type services.msc and then press ENTER.
• On the Services tab that opens, look for the service named Wired AutoConfig right-click and select Properties.
• Change the item Startup type from Manual to Automatic.
• If the service status is Stopped, click on the Start button.

• Open the settings for the network adapter: DX-click on the icon of the LAN connection (lower right) then select Open Network and Sharing Center, click on Change adapter setting.
• DX-click on the connection for which you want to enable 802.1x authentication then select Properties.
• click on tab Authentication and then select the check boxes Enable IEEE 802.1X authentication, Remember my credentials… and Fallback to unauthorized….

• click on the button Settings and on the Protected EAP Properties window that appears check that:
• is checked Validate server certificate choosing from the Troosted Root Certification Authorities the voice AddTrust External CA Root,
• the authentication method selected is Secured password (EAP-MSCHAP v2)

The following configuration is required only for PC NOT in the unitn domain (for PC in the unitn domain skip this step)

• Click the Configure button, then from the Properties window that appears EAP MASCHAPv2 deselect the item Automatically use…. as shown below:

• After connecting the network cable when prompted, enter your unitn credentials

In the event that the credentials are not recognized you will be automatically redirected to a Captive Portal authentication.

Force the reauthentication:

• Unselect Remember my credentials… then deactivate/activate the network card: